Shoe Rack with handles Assembly Instructions -

Pictures will automatically change unless you put your mouse on it . This will keep the current picture on screen and stop the rotation.

Step 1

you are working from the top down .
Step 2

Insert the handle into the top
step 3

flip over the top
Step 4

if the nipple to attach the connector is not out far enough for the connector to grab it see step 5
step 5

with your fingers turn the nipple counter clockwise to have it stick out more. You need minimal amount to grab the connector below as the connector above will tighten it together.
step 6

you will notice if you turn them they protrude more for you to grab the connector.
step 7

add the connectors and hand tighten to lock them in place
step 8

add a 6" nipple and a connector and a 1" nipple to all 4 legs.
step 9

repeat step 8 for the middle shelf. taking note as in step 7 to tighten the connector to lock in the shelf.
Step 10

Add the bottom shelf and lock into place. Then add the 2" nipple
Step 11

add the 4 flanges but do not tighten as they will be used to level the shoe rack on any surface.
Step 12

Flip entire piece over . You are DONE !!! Add your shoes 🙂 And enjoy. Thank you for ordering a pipeworkpieces original piece that was hand made just for you 🙂 Lew

Cart